Shaft Alignment Handbook by John Piotrowski. The book is Reference material on rotating machinery basics, pump overhaul, mechanical seals, basic vibration, and shaft alignment. The primary reasons why machinery is misaligned is lack of proper training, improper tools to do the job, and that people are not given enough time to do it right. …

Welding Symbols on Drawings by A.A. Armstrong and E. N. Gregory. This book is an updated version of Weld symbols on drawings published in 1982. It describes the application of weld symbols in British/European Standard BS EN 22553, International Standard ISO 2553 and American Standard ANSI/AWS A2.4-98. Only the representation of a given weld …

Thermal Power Plant Design and Operation by Dipak Sarkar. This book on THERMAL POWER PLANT Design and Operation deals with various aspects of a thermal power plant starting from fundamentals leading in-depth to technical treatment. The book is aimed at providing a new dimension to the subject and the thrust of …

Welding Skills Processes and Practices for Entry Level Welders Book 1 by Larry Jeffus and Lawrence Bower. The book is an exciting new series that has been designed specifically to support the American Welding Society’s (AWS) training guidelines. Career and technical education instructors at the high school level are often …

Safety With Machinery By John Ridley and Dick Pearce. This book sets out to simplify and clarify how those obligations can be met while remaining sane and economically viable. It explains the principles involved in the protection techniques and the methods of application of safety equipment and gives the engineer …

  This book Managing your shiftwork has been produced to help people understand the nature of shiftwork and is designed to assist individuals in coping with this lifestyle. Everything in it has been extensively researched both inside and outside of the industry for shift workers and is based on the …

HVAC systems and components handbook by Nils R. Grimm, Robert C. Rosaler. The objective of the Handbook of HVAC Design is to provide a practical guide and a reliable reference for designing and operating HVAC systems. It details the necessary steps for planning, design, equipment selection, operation, and maintenance. Included …

Welding for design engineers by the Canadian Welding Bureau. This book has been mainly developed for civil engineers. For more than a century, civil engineering and the importance of having a knowledge of welding engineering students have been taught the design of reinforced concrete structures and riveted steel structures. Hopefully, after …

Diesel Generator Handbook by L. L. J. Mahon. The book is a single-source reference on the practical design and application of diesel generating plant. The book is intended to serve as an engineering guide to all those who may be concerned with the selection, specification, testing, commissioning, operation and maintenance …

Electrical Power System by C L WADHWA. The book covers conventional topics like the basics of power systems, line constant calculations, the performance of lines, corona, the mechanical design of overhead lines, etc., and the more advanced topics like load flow studies, economic load dispatch, optimal power flows, state estimation …

In Handbook of Water and Wastewater Treatment Plant Operations, the intent of the author is twofold. The first intent is to consolidate the information and experience in waterworks and wastewater treatment plant operations that have evolved as a result of technological advances in the field, and as a result of …

All in one Manual of industrial piping practice and Maintenance book by Kirshna Murty (On-The-Job Solutions, Tips, and Insights). This is the book with everything on piping. There are no design theories, no calculations, but we have working principles, pictures, charts, engineering details, along with methods, problems, pitfalls, practical tips, and …